Tungsten Carbide Rods

Carbide Rods for PCB Drills

Ultrafine-grain tungsten carbide rods for PCB micro drills, high-speed drill bits and engraving tools, in grade MU10UF and made to your specification.

Grade
MU10UF
Hardness
94 HRA (typical, MU10UF)

Overview

About Carbide Rods for PCB Drills

Printed circuit boards are drilled with very small solid carbide micro drills, and the rod the drill is ground from decides how sharp the edge can be and how long it lasts. MOSCARB supplies tungsten carbide rods for PCB drills in MU10UF, an ultrafine-grain grade for precision finishing of hardened materials and composites, including high-speed drill bits and engraving tools.

Grade MU10UF

MU10UF has a grain size of 0.4 μm and 6% cobalt binder, with a typical hardness of 94 HRA, a density of 14.8 g/cm³ and a transverse rupture strength of 3800 N/mm² (ISO K05-K10). The fine grain allows a sharp, stable cutting edge on small-diameter tools.

Made to your specification

Diameter, length, tolerance and end form are made to your specification. Send your drawing or requirements and our engineers confirm feasibility, grade and tolerance before quotation.

Technical Data

Carbide Rods for PCB Drills Specifications

Carbide Rods for PCB Drills specifications
GradeMU10UF
MaterialTungsten carbide (cemented carbide), ultrafine grain
WC / Binder (%)WC 94 / Co 6
Hardness94 HRA (typical, MU10UF)
Density (g/cm³)14.8 (typical, MU10UF)
Transverse Rupture Strength (MPa)3800 (typical, MU10UF)
Grain Size (μm)0.4 (ultrafine)
Carbide Rods for PCB Drills

Carbide Grades

Grades for Carbide Rods for PCB Drills

Typical properties. Our engineers confirm the grade for your part before quotation.

Compare all grades →
Grades for Carbide Rods for PCB Drills
GradeISOCo (%)Grain Size (μm)Density (g/cm³)Hardness (HRA)TRS (N/mm²)Application
MU10UFK05-K1060.414.8943800Ultrafine tungsten carbide rod grade for precision finishing of hardened materials and composites, including high-speed drill bits and engraving tools.

Applications

Where Carbide Rods for PCB Drills Are Used

01

PCB Micro Drills

Rods for the small solid carbide drills used to drill printed circuit boards.

02

High-Speed Drill Bits

Rods for high-speed drills in hardened materials and composites.

03

Engraving Tools

Rods for fine engraving tools that need a sharp, stable edge.

Made to Your Drawing

Need a Different Size or Shape?

Send your drawing or specification. Our engineers confirm feasibility, grade and tolerance before quotation.

  • Diameter and length
  • Coolant hole layout
  • Chamfer and end form
  • Grade for your application

FAQ

Carbide Rods for PCB Drills FAQ

Which carbide grade do you use for PCB drill rods?

MU10UF, an ultrafine-grain grade with 0.4 μm grain size, 6% cobalt and a typical hardness of 94 HRA. It is made for precision finishing of hardened materials and composites, including high-speed drill bits and engraving tools. Ask our engineers if your process needs a different grade.

Can you make PCB drill rods to my diameter and length?

Yes. Diameter, length, tolerance and end form are made to your specification. Send your drawing or requirements with the quantity.

What should I send for a quotation?

The rod diameter and length, tolerance, end form (for example chamfered), grade if known, and the quantity. A PDF drawing speeds up the review.

Request a Quote

Get a Quote for Carbide Rods for PCB Drills

Tell us what you need and our engineers will review it and reply with questions or a quotation.

Request a Quote →

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Tolerances and surface requirements
  • Preferred grade or operating conditions
  • Quantity and delivery schedule