Carbide rods with a straight central coolant hole are used for drills and other rotating tools with internal coolant. They are supplied as sintered blanks or precision ground to h6, and we offer cut-to-length service.
Specifications & Features
- Raw Material:Tungsten Carbide, Cobalt Powder / Nickel Powder
- Production Process: Raw material preparation, Compression molding, Sintering, Heat treatment, Machining and Precision grinding
- Grades Optional: MC06、MC55、MC40、MC46、MC44F、MC47S; other grades available upon request
- Size Range: Diameters from 2.2 mm to 32 mm, lengths from 10 mm to 500 mm. Standard 330 mm rods are in stock.
- Surface finish:Ground / Polished.
- Tolerance: Sintered blank tolerance, rough grind tolerance, precision ground h6 tolerance; Separate tolerance for coolant hole diameter
- Custom service: Cut-to-length, special hole diameter, special tolerance, special specs.
- Features: Coolant delivery straight to cutting edge, high rigidity, wear resistance, simplified tool machining, ideal for deep hole machining
- Application: Coolant-fed drills, gun drills, reamers, deep-hole cutting tool blanks
Material Introduction
| Grade | Cobalt content(%) | Density (g/cm³) | Hardness HRA | TRS (MPa) |
|---|---|---|---|---|
| MC06 | 6 | 14.9 | 92.2 | 2800 |
| MC55 | 9 | 14.5 | 93.8 | 3800 |
| MC40 | 10 | 14.45 | 91.8 | 3600 |
| MC46 | 10 | 14.4 | 92.3 | 3800 |
| MC44F | 12 | 14.15 | 92.6 | 4200 |
| MC47S | 12 | 14.2 | 91.4 | 4000 |
Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.







