Tungsten Carbide Rods

Rods with Two Straight Coolant Holes Reduced in Bolt Circle

Tungsten carbide rods with two straight coolant holes on a reduced bolt circle, Ø6.2–32.2 mm and 330 mm long, in grade K46, as sintered blanks or ground to h6.

Grade
MC06, MC55, MC40, MC46, MC44F, MC47S
Tolerance
Ground to h6

Overview

About Rods with Two Straight Coolant Holes Reduced in Bolt Circle

Carbide rods with two straight coolant holes on a reduced pitch circle. The coolant holes are positioned closer to the rod center compared to standard two-hole carbide rods. Available as sintered blanks or precision ground to h6 tolerance, we provide cut-to-length service.

Specifications & Features

  • Raw Material: Tungsten Carbide, Cobalt Powder / Nickel Powder
  • Production Process: Raw material preparation, Compression molding, Sintering, Heat treatment, Machining and Precision grinding
  • Available Grades: MC06, MC55, MC40, MC46, MC44F, MC47S
  • Size Range: Diameters from 6.2 mm to 32 mm, lengths from 10 mm to 500 mm. Standard 330 mm reduced pitch circle double coolant hole carbide rods are in stock.
  • Surface Condition:Sintered Blank / Precision Ground
  • Tolerance: Sintered blank tolerance, rough grind tolerance, precision ground h6 tolerance; separate tolerance for coolant hole diameter
  • Custom service: Cut-to-length, special hole diameter, special pitch circle, special tolerance, custom specifications
  • Features: Dual coolant channels to cutting edge, high rigidity, wear resistance, balanced cooling, suitable for high-feed cutting and special two-flute tool designs
  • Application: Coolant-fed end mills, drills, reamers, high-feed cutting tool blanks, custom internal coolant carbide rod blanks

Material Introduction

GradeCobalt content(%)Density (g/cm³)Hardness
HRA
TRS (MPa)
MC06614.992.22800
MC55914.593.83800
MC401014.4591.83600
MC461014.492.33800
MC44F1214.1592.64200
MC47S1214.291.44000
All dimensions are for reference. Custom sizes, helix angles and hole configurations are available upon request.

Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.

Technical Data

Rods with Two Straight Coolant Holes Reduced in Bolt Circle Specifications

Rods with Two Straight Coolant Holes Reduced in Bolt Circle specifications
GradeMC06, MC55, MC40, MC46, MC44F, MC47S
MaterialTungsten Carbide, Cobalt Powder / Nickel Powder
DimensionsDiameters from 6.2 mm to 32 mm, lengths from 10 mm to 500 mm
ToleranceGround to h6
Technical SpecificationsTwo straight coolant holes on a reduced bolt circle, Ø0.80–2.50 mm, pitch 1.40–9.80 mm
Rods with Two Straight Coolant Holes Reduced in Bolt Circle

Applications

Where Rods with Two Straight Coolant Holes Reduced in Bolt Circle Are Used

01

Drills with small core

Tools where the coolant holes must stay close to the centre.

02

Step and special tools

Tools whose geometry leaves little room for coolant holes near the edge.

Made to Your Drawing

Need a Different Size or Shape?

Send your drawing or specification. Our engineers confirm feasibility, grade and tolerance before quotation.

  • Diameter and length
  • Coolant hole layout
  • Chamfer and end form
  • Grade for your application

FAQ

Rods with Two Straight Coolant Holes Reduced in Bolt Circle FAQ

How do these rods differ from standard two-hole rods?

The two coolant holes are on a smaller bolt circle (TK), so they sit closer to the rod centre. For example, a Ø10.2 mm rod is available with TK 2.45 mm, against 4.85 mm on the standard two-hole rod.

Which grade are these rods made in?

The listed sizes are standard stock in grade K46.

Request a Quote

Get a Quote for Rods with Two Straight Coolant Holes Reduced in Bolt Circle

Tell us what you need and our engineers will review it and reply with questions or a quotation.

Request a Quote →

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Tolerances and surface requirements
  • Preferred grade or operating conditions
  • Quantity and delivery schedule