Tungsten Carbide Rods

Carbide Rods with Double Parallel Straight Coolant Holes

Tungsten carbide rods with two straight coolant holes, Ø4.2–32.2 mm and 330 mm long, in grade K46, as sintered blanks or ground to h6.

Grade
MC06, MC55, MC40, MC46, MC44F, MC47S
Tolerance
Ground to h6
Surface Finish
Sintered Blank / Precision Ground

Overview

About Carbide Rods with Double Parallel Straight Coolant Holes

Carbide rods with two straight coolant holes deliver coolant to both cutting edges of drills and other two-flute rotary tools. Available as sintered blanks or precision ground to h6 tolerance, we provide cut-to-length service.

Specifications & Features

  • Structure: Double parallel straight coolant hole carbide rod (tungsten carbide rod with two parallel straight coolant holes)
  • Production Process: Raw material preparation, Compression molding, Sintering, Heat treatment, Machining and Precision grinding
  • Available Grades: MC06, MC55, MC40, MC46, MC44F, MC47S
  • Size Range: Diameters from 4.2 mm to 32 mm, lengths from 10 mm to 500 mm. Standard 330 mm double coolant hole carbide rods are in stock.
  • Surface Condition:Sintered Blank / Precision Ground
  • Tolerance: Sintered blank tolerance, rough grind tolerance, precision ground h6 tolerance; separate tolerance for coolant hole diameter
  • Custom service: Cut-to-length, special hole diameter, special tolerance, custom specifications
  • Features: Dual coolant channels to cutting edge, high rigidity, wear resistance, balanced cooling, suitable for high-feed cutting
  • Application: Coolant-fed end mills, drills, reamers, high-feed cutting tool blanks, internal coolant carbide rod blanks

Material Introduction

GradeCobalt content(%)Density (g/cm³)Hardness
HRA
TRS (MPa)
MC06614.992.22800
MC55914.593.83800
MC401014.4591.83600
MC461014.492.33800
MC44F1214.1592.64200
MC47S1214.291.44000
All dimensions are for reference. Custom sizes, helix angles and hole configurations are available upon request.

Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.

Technical Data

Carbide Rods with Double Parallel Straight Coolant Holes Specifications

Carbide Rods with Double Parallel Straight Coolant Holes specifications
GradeMC06, MC55, MC40, MC46, MC44F, MC47S
MaterialTungsten Carbide, Cobalt Powder / Nickel Powder
DimensionsDiameters range from 4.2 mm to 32 mm, lengths from 10 mm to 500 mm.
ToleranceGround to h6
Surface FinishSintered Blank / Precision Ground
Carbide Rods with Double Parallel Straight Coolant Holes

Applications

Where Carbide Rods with Double Parallel Straight Coolant Holes Are Used

01

Two-flute drills

Coolant to both cutting edges of solid carbide drills.

02

Deep-hole tools

Tools that need coolant and chip evacuation in deep holes.

Made to Your Drawing

Need a Different Size or Shape?

Send your drawing or specification. Our engineers confirm feasibility, grade and tolerance before quotation.

  • Diameter and length
  • Coolant hole layout
  • Chamfer and end form
  • Grade for your application

FAQ

Carbide Rods with Double Parallel Straight Coolant Holes FAQ

What is the hole pitch (TK)?

TK is the distance between the centres of the two coolant holes. It ranges from 1.90 mm on a Ø4.2 mm rod to 13.75 mm on a Ø32.2 mm rod.

Which grade are these rods made in?

The listed sizes are standard stock in grade K46. Ask us if you need another grade.

Request a Quote

Get a Quote for Carbide Rods with Double Parallel Straight Coolant Holes

Tell us what you need and our engineers will review it and reply with questions or a quotation.

Request a Quote →

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Tolerances and surface requirements
  • Preferred grade or operating conditions
  • Quantity and delivery schedule