Solid cemented carbide rods are the starting material for round-shank cutting tools. They are supplied as sintered blanks or ground to size, Widely used for Mold Parts, Precision Machinery, Fixtures, Jigs, Stamping Dies, Measuring Tools. and can be cut to length or made to your drawing.
Specifications & Features
- Production Process: Raw material preparation, Compression molding, Sintering, Heat treatment, Machining and Precision grinding
- Grades Optional: MC06、MC55、MC40、MC46、MC44F、MC47S and other grades on request
- Size Range: Diameter Φ0.3mm~50mm,Length10mm~500mm. Standard 330 mm rods are in stock.
- Hardness: HRA 89-93, customizable.
- Surface finish:Ground / Polished.
- Custom service: Diameter Tolerance, Length Tolerance, Special Specs.
- Advantages: High hardness, wear resistance, corrosion resistance, long service life.
Material Introduction
| Grade | Cobalt content(%) | Density (g/cm³) | Hardness HRA | TRS (MPa) |
|---|---|---|---|---|
| MC06 | 6 | 14.9 | 92.2 | 2800 |
| MC55 | 9 | 14.5 | 93.8 | 3800 |
| MC40 | 10 | 14.45 | 91.8 | 3600 |
| MC46 | 10 | 14.4 | 92.3 | 3800 |
| MC44F | 12 | 14.15 | 92.6 | 4200 |
| MC47S | 12 | 14.2 | 91.4 | 4000 |
Work materials
Tools made from these rods are used to machine ordinary steel, cast iron, stainless steel, heat-resistant steel, and nickel-based and titanium alloys.
Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.







