Tungsten Carbide Dies & Molds

Tungsten Carbide Wire Drawing Dies

Tungsten carbide wire drawing dies for wet & dry drawing of steel cord, high‑carbon steel, welding wire, alloy wire, bars and tubes. MK/MU/MF series grades, standard and custom carbide drawing nibs for wire‑cable, automotive and aerospace industries.

Grade
MK Series, MU Series, MF Series
Material
Cemented tungsten carbide
Surface Finish
Precision ground and polished

Overview

About Tungsten Carbide Wire Drawing Dies

We supply high‑quality cemented carbide wire‑drawing products for global customers. Manufactured from premium virgin ultra‑fine / sub‑micron tungsten carbide powder, our drawing dies deliver excellent wear resistance, thermal stability and outstanding chipping‑crack resistance. A wide range of specialized carbide grades are available to suit wet and dry drawing processes for steel cord, diamond‑wire substrate, high‑carbon steel, welding wire, non‑ferrous metals and various alloy materials.

Key Features

  • Material: 100% virgin carbide powder
  • Grade: Various grades for choice
  • Advanced production equipments and testing equipments
  • Precision ground and polished
  • High wear resistance,high hardness and impact toughness
  • Samples & small orders are acceptable.

Main Product Series

  • Wet Drawing Dies
  • General Wire & Bar Drawing Dies
  • High-Speed Drawing Dies
  • Taper Drawing Nibs
  • Tube Drawing Dies
  • Perforated Blanks
  • Pipe Mandrels
  • Wire Drawing Accessories

Over 200 standard specifications, customized specifications are also available

  • Standard microporous wire drawing dies
  • Standard large & medium drawing dies
  • Customized wire and tube drawing dies

Grade Properties & Application

SeriesGradeHardness (HRA)Density (g/cm³)Transverse Rupture Strength (N/mm²)Grain Size (μm)Recommended Application
MK SeriesMK0591.3~92.314.85~15.0529001.0~2.0With high hardness and wear resistance, suitable for drawing medium and high carbon steel and non-ferrous metal.
MK05A91.8~92.814.85~15.0528000.8~1.5With higher hardness and wear resistance, suitable for drawing medium & high carbon steel and non-ferrous metal.
MK10H90.2~91.214.85~15.0527001.5~3.0Recommended grade for CVD substrate, suitable for drawing medium and high carbon steel.
MK20H90.6~91.414.70~14.9028001.0~2.0With high hardness and toughness, suitable for the drawing of bar, tube and large-size profile.
MK30H89.5~90.514.65~14.8528001.5~3.0With good toughness, suitable for the drawing of bar, tube and large-size profile.
MU SeriesMU1092.5~93.514.72~14.9228000.2~0.8Suitable for drawing high carbon steel, welding wire and non-ferrous metal.
MU2091.2~92.214.30~14.5038000.2~0.8Suitable for drawing wear-resistant parts and high carbon steel in drawing industry.
MU09293.0~94.014.34~14.5441000.2~0.5With high strength and wear resistance, suitable for high speed drawing of high carbon steel.
MU10UT93.7~94.714.62~14.8232000.2~0.5With high hardness and excellent wear resistance, suitable for drawing steel cord, diamond wire bus and high carbon steel.
MF SeriesMF40H88.9~89.914.10~14.3037001.0~2.0With good wear resistance and high toughness, suitable for threaded mandrel products.
MF50H88.2~89.213.90~14.1038001.5~3.0With the characteristics of anti-cracking and wear resistance, suitable for profile, extrusion die and other products.

Grade Selection Tip

  • MK Series: Cemented carbide grades for dry drawing of high-carbon steel, steel cord, diamond wire substrate and other high-standard wire materials
  • MU Series: Cemented carbide grades for wet drawing of high-standard wire materials including steel cord and diamond wire substrate
  • MF Series: Special cemented carbide material for extrusion of metal profiles and bars

Important Notes for Usage

  • Select proper die grades and reduction angles according to workpiece material and drawing equipment; reasonably distribute compression ratio for each drawing pass.
  • Complete wire pre-treatment (cleaning, descaling, annealing, phosphating) before drawing.
  • Apply suitable drawing lubricant for sufficient lubrication and cooling.
  • Stop production and contact technical support in case of die cracking, wire scratching, wire breakage, over-heating or abnormal rapid wear.
  • Refurbish dies in time once service life is reached to avoid workpiece scrap.

Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.

Technical Data

Tungsten Carbide Wire Drawing Dies Specifications

Tungsten Carbide Wire Drawing Dies specifications
GradeMK Series, MU Series, MF Series
MaterialCemented tungsten carbide
DimensionsOver 200 standard specifications, customized specifications are also available
Surface FinishPrecision ground and polished
Tungsten Carbide Wire Drawing Dies

Applications

Where Tungsten Carbide Wire Drawing Dies Are Used

01

Wire drawing

Ferrous and non-ferrous metal wire.

02

Rod and bar drawing

Round, square, rectangular and hexagonal bars.

03

Tube drawing

Diameter and wall reduction, with floating plugs.

04

Strip drawing

Non-ferrous metal strip.

Made to Your Drawing

Need a Different Size or Shape?

Send your drawing or specification. Our engineers confirm feasibility, grade and tolerance before quotation.

  • Die size and outer dimensions
  • Bore and profile
  • Grade for wear or impact
  • Dies made to your drawing

FAQ

Tungsten Carbide Wire Drawing Dies FAQ

How do I order a die nib?

Give the type, outer diameter D and the bore size you need. Land length and other bore details are confirmed with you before production.

Do you make shaped dies?

Yes. Types 40, 41, 42 and 60 are for square, rectangular, flat and hexagonal sections. Other shapes can be made to your drawing.

Request a Quote

Get a Quote for Tungsten Carbide Wire Drawing Dies

Tell us what you need and our engineers will review it and reply with questions or a quotation.

Request a Quote →

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Tolerances and surface requirements
  • Preferred grade or operating conditions
  • Quantity and delivery schedule