Tungsten Carbide Dies & Molds

Cold Heading Dies

Tungsten carbide cold heading die inserts (carbide nibs) for multi-station fastener cold forging. Resist high-frequency axial impact and radial stress, stable precision for high-tensile bolts, nuts, rivets and screws. Multiple YG carbide grades available.

Grade
YG6X, YG6, YG8, YG8L, YG15, YG20
Material
Cemented tungsten carbide

Overview

About Cold Heading Dies

Accelerate your fastener manufacturing and cold forging production cycles with our high-performance tungsten carbide cold heading die inserts (carbide nibs). Specially engineered to withstand severe, high-frequency repetitive axial impacts and intense radial expansion stresses, these premium cemented carbide wear pellets are the heavy-duty wear cores fitted inside multi-station cold heading steel mold casings.

Supplied as precision-sintered or semi-finished blanks with centered pre-formed pilot holes, these carbide cold heading inserts support simple wire-EDM profiling, final sizing and diamond polishing. They maintain excellent dimensional stability for high-volume production of high-tensile bolts, nuts, rivets and screws.

Key Features

  • High compressive strength and impact fatigue resistance for multi-station cold heading
  • HIP sintered cemented carbide, consistent microstructure, less cracking under cyclic impact
  • Pre-drilled pilot hole design, convenient for wire EDM and finish polishing
  • Multiple YG carbide grades available to match carbon steel, alloy steel and stainless steel fastener forming
  • Custom outer diameter, thickness and grade upon customer drawings
  • Suitable for mass production of high-tensile bolts, screws, rivets and nuts

Grade Properties & Application

GradeHardness (HRA)TRS (N/mm²)Density (g/cm³)Performance & Application
YG6X92180014.9Suitable for drawing steel wire, non-ferrous metal wire or bar stock below 6.0 mm diameter under light load conditions.
YG690.5200014.9Suitable for drawing steel wire, non-ferrous metal and alloy bars below 20 mm diameter; also for drawing pipes below 10 mm diameter under moderate load.
YG890220014.7Used for drawing steel, non-ferrous metal and alloy bars & pipes; also for mechanical parts, tools and wear components.
YG8.289200014.6Used for drawing steel, non-ferrous metal and alloy bars & pipes; also for mechanical parts, tools and wear components.
YG8L89200014.6Used for drawing steel, non-ferrous metal and alloy bars & pipes; also for mechanical parts, tools and wear components.
YG1188.5230014.4Suitable for high-reduction steel rod and steel pipe drawing, as well as top hammers, piercing dies and stamping dies under heavy stress.
YG1587260014.0Suitable for high-reduction steel rod and steel pipe drawing, as well as top hammers, piercing dies and stamping dies under heavy stress.
YG2085280013.6Preferred grade for cold heading & stamping dies. For stamping dies, including watch parts, battery shells, toothpaste tube containers, small steel balls, screws and nuts forming.
YG20C83.5280013.6Primary grade for cold heading dies. For cold forging, cold heading and cold pressing dies for standard fasteners, bearings and tooling; also for bullet and shell stamping dies.

Applications

✅ Multi-station cold heading / cold forging of bolts, screws, rivets, nuts
✅ Piercing, stamping and cold forming dies for fastener industry
✅ Bearing, standard part and hardware component manufacturing
✅ Optional: Wire, bar and tube drawing (using dedicated grades)

Send your drawing or requirements and our engineers will review them and reply with questions or a quotation.

Technical Data

Cold Heading Dies Specifications

Cold Heading Dies specifications
GradeYG6X, YG6, YG8, YG8L, YG15, YG20
MaterialCemented tungsten carbide
Technical SpecificationsStandard heading die blanks, BC countersunk and BF internal hexagon types
Cold Heading Dies

Applications

Where Cold Heading Dies Are Used

01

Bolt and screw heading

Heading dies for standard bolts and screws.

02

Countersunk heads

BC die blanks for countersunk fasteners.

03

Hexagon socket heads

BF die blanks for internal hexagon fasteners.

Made to Your Drawing

Need a Different Size or Shape?

Send your drawing or specification. Our engineers confirm feasibility, grade and tolerance before quotation.

  • Die size and outer dimensions
  • Bore and profile
  • Grade for wear or impact
  • Dies made to your drawing

FAQ

Cold Heading Dies FAQ

Which bolt sizes do your die blanks cover?

Standard heading die blanks cover M1 to M27. BC countersunk blanks cover M4 to M16, and BF internal hexagon blanks cover M1.6 to M20.

Can you make dies to my drawing?

Yes. Send your drawing with the fastener size and material, and our engineers will confirm the grade and dimensions.

Request a Quote

Get a Quote for Cold Heading Dies

Tell us what you need and our engineers will review it and reply with questions or a quotation.

Request a Quote →

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Tolerances and surface requirements
  • Preferred grade or operating conditions
  • Quantity and delivery schedule