Mining & Rock Drilling

Tungsten Carbide for Mining and Rock Drilling

Rock drilling, tunnelling and crushing combine abrasive rock with repeated impact. MOSCARB supplies tungsten carbide buttons for drill bits, brazed tips, TBM cutters, studs for high-pressure grinding rolls and wear bars for VSI sand making machines, in grades balanced between wear resistance and toughness.

Wear challenge
Abrasive Wear
Wear challenge
Impact Loading
Wear challenge
Severe Mechanical Wear
Tunnel boring cutter head in rock

Industry Overview

Mining & Rock Drilling Overview

In mining and construction, carbide parts work in direct contact with rock. Drill bit buttons are driven into the rock with every blow, tunnel boring machine cutters roll under heavy load, and crusher and sand-making parts are scoured by broken rock and sand.

These parts fail in two ways: they wear down by abrasion, or they chip and break under impact. The grade has to balance both. MOSCARB makes buttons, brazed tips, TBM cutters, HPGR studs and VSI wear bars, and non-standard mining carbide to customer drawings.

Typical Applications

Mining & Rock Drilling Applications

01

DTH Drilling

Carbide inserts for down-the-hole drill bits in medium-hard rock.

02

Roller Cone and Reamer Bits

Carbide for roller cone drill bits and reamer bits.

03

Tunnelling

Tungsten carbide cutters for tunnel boring machines.

04

Crushing and Sand Making

Studs for high-pressure grinding rolls (HPGR) and wear bars for VSI sand making machines.

Operating Conditions

Operating Conditions & Wear Challenges

Operating conditions

  • Abrasive rock contact
  • Repeated impact loading
  • Severe mechanical wear

Abrasive Wear

Hard rock and sand grind down buttons and studs; harder grades wear more slowly.

Impact Loading

Every blow of a percussive drill loads the button; too little toughness leads to chipping and breakage.

Severe Mechanical Wear

Crushing and grinding combine abrasion with high contact pressure on studs and wear bars.

Carbide Solutions

Recommended Carbide Components

Tungsten carbide components we make for Mining & Rock Drilling.

Mining Buttons

Tungsten carbide buttons for button bits and mining tools.

Brazed Tips

Tungsten carbide brazed tips.

TBM Cutters

Carbide cutters for tunnel boring machines.

HPGR Studs

Tungsten carbide studs for high-pressure grinding rolls.

VSI Wear Bars

Wear bars for VSI sand making machines.

Custom Mining Carbide

Non-standard mining parts made to your drawing.

Product categories

Material & Grade Selection

Carbide Grades for Mining & Rock Drilling

Compare all grades →

MK06 is a wear-resistant, tough grade for DTH drill bit inserts in medium-hard rock. MK10 is used for roller cone drill bits and reamer bits in medium-hard rock, and MK11 for large roller cone and reamer bits.

Tungsten carbide grades for Mining & Rock Drilling with typical properties
GradeISOCo (%)Grain Size (μm)Density (g/cm³)Hardness (HRA)TRS (N/mm²)Application
MK06—6Fine14.95902600Wear-resistant, tough tungsten carbide grade for down-the-hole (DTH) drill bit inserts used in medium-hard rock formations.
MK10—10Medium14.5882850Tungsten carbide mining tool grade for roller cone drill bits and reamer bits operating in medium-hard rock formations.
MK11—11Medium14.487.72900Tungsten carbide grade for large roller cone drill bits and reamer bits used in medium-hard rock drilling.

Technical FAQ

Mining & Rock Drilling: Technical FAQ

Which grade should I use for DTH bit buttons?

MK06 is our grade for down-the-hole drill bit inserts in medium-hard rock. For roller cone and reamer bits we use MK10 and MK11. Send the rock type and bit design and we confirm the grade.

How is wear resistance balanced against toughness?

More cobalt and a coarser grain make carbide tougher but less wear-resistant. Abrasive rock favours wear resistance, heavy impact favours toughness, and the grade is chosen between the two.

Do you supply studs for HPGR and wear bars for VSI crushers?

Yes. Send the stud or bar dimensions or a drawing, and the machine type.

What should I send for a quotation?

The part drawing or dimensions, the rock or ore, the drilling or crushing method, and the quantity.

Request a Quote

Send Your Drawing and Operating Conditions

Our engineers review the drawing and the application, recommend a grade and reply with questions or a quotation.

For a faster quotation, include:

  • Drawing (PDF) or main dimensions
  • Operating conditions: media, loads, temperature
  • How the current part wears or fails
  • Quantity and delivery schedule

Inquiry about: Mining & Rock Drilling

Files are used only to process your inquiry. Do not include confidential data unless you agree to share it with MOSCARB. Privacy policy