Grade Selection
Tungsten Carbide Grades
Typical properties of MOSCARB tungsten carbide grades: cobalt content, grain size, density, hardness and transverse rupture strength, with the applications each grade is made for. Filter by industry or property, or ask our engineers which grade suits your part.
- Grades
- 34
- Industries
- 8
- Cobalt
- 2–30 %
- Hardness
- 77.5–94.5 HRA
| Application | ||||||||
|---|---|---|---|---|---|---|---|---|
| MU20 | Tungsten Carbide Rods | K20-K40 | 10 | 0.7Submicron | 14.45 | 91.8 | 3800 | Sub-fine-grain tungsten carbide rod grade for manufacturing solid carbide drills and end mills. Show detailsHide detailsSuitable for medium-speed machining of steel, aluminum alloys, heat-resistant alloys and cast iron. |
| MU092 | Tungsten Carbide Rods | K05-K10 | 9 | 0.2Ultrafine | 14.44 | 94 | 4100 | Ultrafine-grain tungsten carbide rod grade for precision finishing of hardened materials above HRC 58. Show detailsHide detailsAlso suitable for machining stainless steel and aluminum alloys. |
| MU25UF | Tungsten Carbide Rods | K20-K40 | 12 | 0.4Ultrafine | 14.1 | 92.6 | 4200 | Ultrafine tungsten carbide rod grade for milling stainless steel, non-ferrous metals, titanium alloys, high-temperature alloys and hardened materials at HRC 50–58. Show detailsHide detailsAlso suitable for selected wear-resistant components. |
| MU10UF | Tungsten Carbide Rods | K05-K10 | 6 | 0.4Ultrafine | 14.8 | 94 | 3800 | Ultrafine tungsten carbide rod grade for precision finishing of hardened materials and composites, including high-speed drill bits and engraving tools. |
| YG6 | Custom Tungsten Carbide Wear Parts | K10 | 6 | 1.5Medium | 15.5 | 92.5 | 2720 | Tungsten carbide grade for wear-resistant saw tips, nozzles and custom carbide components subjected to mechanical loads. |
| YG8 | Custom Tungsten Carbide Wear Parts | K20 | 8 | 1.5Medium | 14.7 | 90 | 2900 | Wear-resistant tungsten carbide grade with high strength for custom carbide wear parts, saw tips, wear plates and components operating under moderate mechanical loads. |
| YG15 | Custom Tungsten Carbide Wear Parts | K40 | 15 | 1.5Medium | 14.05 | 87 | 2700 | Tough tungsten carbide grade for custom wear-resistant components subjected to heavy mechanical loads and impact. |
| YG20 | Custom Tungsten Carbide Wear Parts | G40 | 20 | 1.5Medium | 13.6 | 85 | 2500 | Impact-resistant tungsten carbide grade for stamping dies, battery case forming dies, screw forming tools and cold heading dies requiring high toughness. |
| MGR20 | Carbide Roll Rings (Steel Industry) | — | 10.5 | 3Coarse | 14.5 | 84 | 2400 | Tungsten carbide roll ring grade for finishing mill stands 13–14 and reducing or sizing mill stands 17–18 in steel bar and wire rod rolling lines. |
| MGR30 | Carbide Roll Rings (Steel Industry) | — | 15 | 3Coarse | 14 | 84.5 | 2350 | Tungsten carbide roll ring grade for finishing mill stands 10–12 in steel rolling operations. |
| MGR40 | Carbide Roll Rings (Steel Industry) | — | 18 | 3Coarse | 13.7 | 83 | 2200 | Tungsten carbide roll ring grade for finishing mill stands 8–9 in steel bar and wire rod production. |
| MGR45 | Carbide Roll Rings (Steel Industry) | — | 20 | 3.2Coarse | 13.6 | 82 | 2150 | Tungsten carbide roll ring grade for finishing mill stands 5–7 in steel rolling mills. |
| MGR55 | Carbide Roll Rings (Steel Industry) | — | 25 | 3.2Coarse | 13.1 | 79.5 | 2100 | Tungsten carbide roll ring grade for pre-finishing mill stands 1–4 in steel rolling lines. |
| MGR60 | Carbide Roll Rings (Steel Industry) | — | 30 | 3.5Coarse | 12.65 | 77.5 | 2000 | Tungsten carbide roll ring grade for intermediate rolling mills producing threaded reinforcing steel bars (rebar). |
| MK06 | Carbide Mining Tools | — | 6 | FineFine | 14.95 | 90 | 2600 | Wear-resistant, tough tungsten carbide grade for down-the-hole (DTH) drill bit inserts used in medium-hard rock formations. |
| MK10 | Carbide Mining Tools | — | 10 | MediumMedium | 14.5 | 88 | 2850 | Tungsten carbide mining tool grade for roller cone drill bits and reamer bits operating in medium-hard rock formations. |
| MK11 | Carbide Mining Tools | — | 11 | MediumMedium | 14.4 | 87.7 | 2900 | Tungsten carbide grade for large roller cone drill bits and reamer bits used in medium-hard rock drilling. |
| MCG5 | Carbide Cold Heading Die / Carbide Forming Tools | — | 12 | MediumMedium | 14.3 | 88.3 | 3300 | High-toughness cemented carbide grade for cold heading die blanks and metal forming tools. |
| MCG6 | Carbide Cold Heading Die / Carbide Forming Tools | — | 14 | MediumMedium | 14.12 | 87.3 | 3140 | High-toughness tungsten carbide grade for cold heading dies and demanding metal forming applications. |
| MCA18 | Carbide Cold Heading Die / Carbide Forming Tools | — | 18 | CoarseCoarse | 13.75 | 85.1 | 2940 | Tungsten carbide grade for screw forming dies with die openings below 20 mm in diameter. |
| MCA24 | Carbide Cold Heading Die / Carbide Forming Tools | — | 24 | CoarseCoarse | 13.25 | 82.5 | 2650 | Tungsten carbide grade for screw forming dies with die openings from 20 to 50 mm in diameter. |
| MCT15 | Carbide Cold Heading Die / Carbide Forming Tools | — | 15 | CoarseCoarse | 13.8 | 86 | 2700 | Tungsten carbide die grade for cold forming stainless steel screws with die openings below 2 mm in diameter. |
| MCT20 | Carbide Cold Heading Die / Carbide Forming Tools | — | 20 | CoarseCoarse | 13.6 | 84.5 | 2660 | Tungsten carbide die grade for forming stainless steel screws with die openings above 2 mm in diameter. |
| MCA20 | Carbide Cold Heading Die / Carbide Forming Tools | — | 20 | CoarseCoarse | 13.55 | 84.1 | 2740 | Tungsten carbide grade for warm forging and hot forging die applications. |
| MS09U | Cemented Carbide Gear Cutting Tool | — | 9 | 0.4Ultrafine | 14.55 | 93.5 | 4000 | Ultrafine-grain cemented carbide grade combining sharp cutting edges with high wear resistance. Show detailsHide detailsDesigned for carbide gear hob blanks used in hard gear hobbing of gears above HRC 60. |
| MS12UF | Cemented Carbide Gear Cutting Tool | — | 12 | 0.4Ultrafine | 14.12 | 92.5 | 4000 | Ultrafine-grain cemented carbide grade with excellent cutting-edge sharpness and wear resistance. Show detailsHide detailsSuitable for gear cutting tool blanks machining gears up to HRC 55. |
| MS10ST | Cemented Carbide Gear Cutting Tool | — | 10 | 0.6–0.8Submicron | 14.45 | 91.7 | 3800 | Submicron-grain cemented carbide grade offering sharp cutting edges and resistance to edge chipping. Show detailsHide detailsSuitable for gear hob blanks and gear cutting tools machining gears up to HRC 35. |
| MS50H | Oil & Gas Tungsten Carbide Components | G30 | 14 | 1.5-3.0Medium / Coarse | 13.95-14.15 | 88.2-89.2 | 3800 | Impact-resistant and wear-resistant tungsten carbide grade for shaft sleeves, bushings and custom wear parts used in oil and gas and chemical processing equipment. |
| MS30H | Oil & Gas Tungsten Carbide Components | K30 | 8 | 1.5-3.0Medium / Coarse | 14.75 | 90.2 | 2800 | Tungsten carbide grade with a balance of wear resistance and toughness for precision shaft sleeves and carbide bushings. |
| MSGU10 | Oil & Gas Tungsten Carbide Components | K05-K10 | 6 | 0.6-0.9Submicron | 14.85 | 93 | 3000 | High-hardness, wear-resistant tungsten carbide grade for shaft sleeves and bushings in demanding industrial equipment. |
| MSGK05A | Oil & Gas Tungsten Carbide Components | K10-K20 | 6 | 1.0-2.0Fine / Medium | 14.95 | 92 | 3200 | Wear-resistant, high-toughness tungsten carbide grade for oil-immersed pump components, needle valve tips and valve seats. |
| MS02UCR | Woodworking | — | 2 | 0.4Ultrafine | 14.95 | 94.5 | 3400 | Low-cobalt ultrafine-grain tungsten carbide grade with very high hardness and corrosion resistance. Show detailsHide detailsSuitable for industrial cutting tools processing medium-density fiberboard (MDF) and acrylic sheets. |
| MS06CR | Woodworking | — | 3 | 0.6Submicron | 14.8 | 93.7 | 2900 | General-purpose fine-grain and mixed-grain tungsten carbide grade with low-to-medium cobalt content. Show detailsHide detailsSuitable for cutting solid wood and selected copper and aluminum alloy profiles. |
| MS08CR | Woodworking | — | 6 | 0.8Submicron | 14.8 | 93.1 | 2700 | Submicron-grain tungsten carbide grade for cutting natural wood, relatively soft engineered wood panels and non-ferrous metals. |
No grades match these filters.
Values are typical properties. Grain structure is classified from the grain size: Ultrafine ≤ 0.5 μm, Submicron ≤ 0.9 μm, Fine ≤ 1.3 μm, Medium ≤ 2.5 μm, Coarse above 2.5 μm.
Grade Recommendation
Not Sure Which Grade to Use?
Send your drawing and working conditions. Our engineers recommend a grade and confirm tolerance before quotation.
- Workpiece or wear material
- Impact and load conditions
- Hardness or toughness priority
- Part drawing and quantity

