Grade Selection

Tungsten Carbide Grades

Typical properties of MOSCARB tungsten carbide grades: cobalt content, grain size, density, hardness and transverse rupture strength, with the applications each grade is made for. Filter by industry or property, or ask our engineers which grade suits your part.

Grades
34
Industries
8
Cobalt
2–30 %
Hardness
77.5–94.5 HRA
Tungsten carbide grades with cobalt content, grain size, density, hardness, transverse rupture strength, ISO code and application. Column headings sort the table.
Application
MU20 Tungsten Carbide Rods K20-K40 10 0.7Submicron 14.45 91.8 3800

Sub-fine-grain tungsten carbide rod grade for manufacturing solid carbide drills and end mills.

Show detailsHide details

Suitable for medium-speed machining of steel, aluminum alloys, heat-resistant alloys and cast iron.

MU092 Tungsten Carbide Rods K05-K10 9 0.2Ultrafine 14.44 94 4100

Ultrafine-grain tungsten carbide rod grade for precision finishing of hardened materials above HRC 58.

Show detailsHide details

Also suitable for machining stainless steel and aluminum alloys.

MU25UF Tungsten Carbide Rods K20-K40 12 0.4Ultrafine 14.1 92.6 4200

Ultrafine tungsten carbide rod grade for milling stainless steel, non-ferrous metals, titanium alloys, high-temperature alloys and hardened materials at HRC 50–58.

Show detailsHide details

Also suitable for selected wear-resistant components.

MU10UF Tungsten Carbide Rods K05-K10 6 0.4Ultrafine 14.8 94 3800

Ultrafine tungsten carbide rod grade for precision finishing of hardened materials and composites, including high-speed drill bits and engraving tools.

YG6 Custom Tungsten Carbide Wear Parts K10 6 1.5Medium 15.5 92.5 2720

Tungsten carbide grade for wear-resistant saw tips, nozzles and custom carbide components subjected to mechanical loads.

YG8 Custom Tungsten Carbide Wear Parts K20 8 1.5Medium 14.7 90 2900

Wear-resistant tungsten carbide grade with high strength for custom carbide wear parts, saw tips, wear plates and components operating under moderate mechanical loads.

YG15 Custom Tungsten Carbide Wear Parts K40 15 1.5Medium 14.05 87 2700

Tough tungsten carbide grade for custom wear-resistant components subjected to heavy mechanical loads and impact.

YG20 Custom Tungsten Carbide Wear Parts G40 20 1.5Medium 13.6 85 2500

Impact-resistant tungsten carbide grade for stamping dies, battery case forming dies, screw forming tools and cold heading dies requiring high toughness.

MGR20 Carbide Roll Rings (Steel Industry) — 10.5 3Coarse 14.5 84 2400

Tungsten carbide roll ring grade for finishing mill stands 13–14 and reducing or sizing mill stands 17–18 in steel bar and wire rod rolling lines.

MGR30 Carbide Roll Rings (Steel Industry) — 15 3Coarse 14 84.5 2350

Tungsten carbide roll ring grade for finishing mill stands 10–12 in steel rolling operations.

MGR40 Carbide Roll Rings (Steel Industry) — 18 3Coarse 13.7 83 2200

Tungsten carbide roll ring grade for finishing mill stands 8–9 in steel bar and wire rod production.

MGR45 Carbide Roll Rings (Steel Industry) — 20 3.2Coarse 13.6 82 2150

Tungsten carbide roll ring grade for finishing mill stands 5–7 in steel rolling mills.

MGR55 Carbide Roll Rings (Steel Industry) — 25 3.2Coarse 13.1 79.5 2100

Tungsten carbide roll ring grade for pre-finishing mill stands 1–4 in steel rolling lines.

MGR60 Carbide Roll Rings (Steel Industry) — 30 3.5Coarse 12.65 77.5 2000

Tungsten carbide roll ring grade for intermediate rolling mills producing threaded reinforcing steel bars (rebar).

MK06 Carbide Mining Tools — 6 FineFine 14.95 90 2600

Wear-resistant, tough tungsten carbide grade for down-the-hole (DTH) drill bit inserts used in medium-hard rock formations.

MK10 Carbide Mining Tools — 10 MediumMedium 14.5 88 2850

Tungsten carbide mining tool grade for roller cone drill bits and reamer bits operating in medium-hard rock formations.

MK11 Carbide Mining Tools — 11 MediumMedium 14.4 87.7 2900

Tungsten carbide grade for large roller cone drill bits and reamer bits used in medium-hard rock drilling.

MCG5 Carbide Cold Heading Die / Carbide Forming Tools — 12 MediumMedium 14.3 88.3 3300

High-toughness cemented carbide grade for cold heading die blanks and metal forming tools.

MCG6 Carbide Cold Heading Die / Carbide Forming Tools — 14 MediumMedium 14.12 87.3 3140

High-toughness tungsten carbide grade for cold heading dies and demanding metal forming applications.

MCA18 Carbide Cold Heading Die / Carbide Forming Tools — 18 CoarseCoarse 13.75 85.1 2940

Tungsten carbide grade for screw forming dies with die openings below 20 mm in diameter.

MCA24 Carbide Cold Heading Die / Carbide Forming Tools — 24 CoarseCoarse 13.25 82.5 2650

Tungsten carbide grade for screw forming dies with die openings from 20 to 50 mm in diameter.

MCT15 Carbide Cold Heading Die / Carbide Forming Tools — 15 CoarseCoarse 13.8 86 2700

Tungsten carbide die grade for cold forming stainless steel screws with die openings below 2 mm in diameter.

MCT20 Carbide Cold Heading Die / Carbide Forming Tools — 20 CoarseCoarse 13.6 84.5 2660

Tungsten carbide die grade for forming stainless steel screws with die openings above 2 mm in diameter.

MCA20 Carbide Cold Heading Die / Carbide Forming Tools — 20 CoarseCoarse 13.55 84.1 2740

Tungsten carbide grade for warm forging and hot forging die applications.

MS09U Cemented Carbide Gear Cutting Tool — 9 0.4Ultrafine 14.55 93.5 4000

Ultrafine-grain cemented carbide grade combining sharp cutting edges with high wear resistance.

Show detailsHide details

Designed for carbide gear hob blanks used in hard gear hobbing of gears above HRC 60.

MS12UF Cemented Carbide Gear Cutting Tool — 12 0.4Ultrafine 14.12 92.5 4000

Ultrafine-grain cemented carbide grade with excellent cutting-edge sharpness and wear resistance.

Show detailsHide details

Suitable for gear cutting tool blanks machining gears up to HRC 55.

MS10ST Cemented Carbide Gear Cutting Tool — 10 0.6–0.8Submicron 14.45 91.7 3800

Submicron-grain cemented carbide grade offering sharp cutting edges and resistance to edge chipping.

Show detailsHide details

Suitable for gear hob blanks and gear cutting tools machining gears up to HRC 35.

MS50H Oil & Gas Tungsten Carbide Components G30 14 1.5-3.0Medium / Coarse 13.95-14.15 88.2-89.2 3800

Impact-resistant and wear-resistant tungsten carbide grade for shaft sleeves, bushings and custom wear parts used in oil and gas and chemical processing equipment.

MS30H Oil & Gas Tungsten Carbide Components K30 8 1.5-3.0Medium / Coarse 14.75 90.2 2800

Tungsten carbide grade with a balance of wear resistance and toughness for precision shaft sleeves and carbide bushings.

MSGU10 Oil & Gas Tungsten Carbide Components K05-K10 6 0.6-0.9Submicron 14.85 93 3000

High-hardness, wear-resistant tungsten carbide grade for shaft sleeves and bushings in demanding industrial equipment.

MSGK05A Oil & Gas Tungsten Carbide Components K10-K20 6 1.0-2.0Fine / Medium 14.95 92 3200

Wear-resistant, high-toughness tungsten carbide grade for oil-immersed pump components, needle valve tips and valve seats.

MS02UCR Woodworking — 2 0.4Ultrafine 14.95 94.5 3400

Low-cobalt ultrafine-grain tungsten carbide grade with very high hardness and corrosion resistance.

Show detailsHide details

Suitable for industrial cutting tools processing medium-density fiberboard (MDF) and acrylic sheets.

MS06CR Woodworking — 3 0.6Submicron 14.8 93.7 2900

General-purpose fine-grain and mixed-grain tungsten carbide grade with low-to-medium cobalt content.

Show detailsHide details

Suitable for cutting solid wood and selected copper and aluminum alloy profiles.

MS08CR Woodworking — 6 0.8Submicron 14.8 93.1 2700

Submicron-grain tungsten carbide grade for cutting natural wood, relatively soft engineered wood panels and non-ferrous metals.

Values are typical properties. Grain structure is classified from the grain size: Ultrafine ≤ 0.5 μm, Submicron ≤ 0.9 μm, Fine ≤ 1.3 μm, Medium ≤ 2.5 μm, Coarse above 2.5 μm.

Grade Recommendation

Not Sure Which Grade to Use?

Send your drawing and working conditions. Our engineers recommend a grade and confirm tolerance before quotation.

  • Workpiece or wear material
  • Impact and load conditions
  • Hardness or toughness priority
  • Part drawing and quantity